Kia EV6 charging speed
The Kia EV6 has a 11 kW three-phase onboard charger. That number — not the charger on your wall — is what decides how fast it charges at home.
Three-phase helps a little
This car draws 7.4 kW single-phase and 11 kW on three-phase — a gain of about 3.1 kW. Real, but modest. If you already have three-phase, use it. If you don't, the upgrade is hard to justify on charging speed alone.
The short answer
On the standard Australian home charger — 32 A single-phase — The Kia EV6 draws 7.4 kW, adding roughly 38 km of range per hour. Over an eight-hour overnight window that is about 303 km — far more than most Australians drive in a day.
What every charger actually delivers
Every figure below is computed live from this car's onboard charger rating, not copied from a brochure. "Wasted" is capacity you would pay for and never use.
| Charger | Supply | This car draws | Range per hour | 20–80% | Wasted |
|---|---|---|---|---|---|
| 10 A power point | Single-phase | 1.8 kW | 9 km | 1 day 4 h | — |
| 15 A power point | Single-phase | 2.8 kW | 14 km | 17 h 52 min | — |
| 32 A single-phase charger | Single-phase | 7.4 kW | 38 km | 6 h 42 min | — |
| 16 A three-phase charger | Three-phase | 11 kW | 54 km | 4 h 42 min | — |
| 32 A three-phase charger | Three-phase | 11 kW | 54 km | 4 h 42 min | 12 |
Assumes a battery of 74 kWh and real-world consumption of 175 Wh/km (segment estimate). Charging losses of about 10% are included. Change the assumptions in the calculator →
Notes
- Kia Australia confirmed 10.5 kW, backed by OBD measurement. The MY26 facelift may be 11 kW — sources conflict.
Sources
We link the document that states the AC charger rating directly. See how we source and verify.
Work out your own numbers
The table above assumes a full charge from 20–80%. If you want different start and finish points, or want to compare this car against another, the calculator does it and shows every step of the working.
Keep reading